Supports the following standards: ASTM D6925, AASHTO T312, CS9010-1115, CS9010-1230, SHRP M-002, T 0736-2011, TEX- 241-F, EN 12697-10
Compaction is achieved by the application of a vertical stress (normally 600KPa (87psi)) via end platens to a known mass of asphaltic mixture within a 150 and 100mm (6" and 4") internal Ø mold. The longitudinal axis of the mold is rotated (gyrated) at a fixed angle to the vertical while the platens are kept parallel and horizontal. During compaction the height of the sample is automatically measured and both the mixture density and void content calculated.
Features:
Automatic mold insertion and retraction on side table which allows cooling time before extraction without loss of compaction time (especially important for rubberized asphalt)
150 mm and 100 mm (6 and 4 inch) internal Ø molds can be tested without changing parts
Cold mix (emulsion) materials can be compacted and the expelled fluid collected
Ethernet and multiple USB connections for data acquisition and control system
User friendly LabVIEW™ software displays results in real time
Machine calibrated with traceable equipment
Option for mold up to 300 mm (11.8 inch) high
Manufactured in the UK
Software:
User friendly, intuitive and reliable Windows® software developed using LabVIEW™
Software allows 3 methods of compaction – number of gyrations, height and target density. The operator is guided through every step of the compaction
Real-time display of current height, density & void content (%) Data is recorded to disk at regular intervals for further analysis
Utilities are included for transducer check, diagnostic routines and calibration.
PRODUCTS OFFERED BY INDUSTRY
• ZycoTherm-SP WMA/HMA • NanoTac Less-Tracking Tack Coat • EC-30 Environmental Prime Coat • Asphalt Pavement Seal Coat • High Performance Cold Mix • Asphalt Crack Repair • Hot Pour Joint Sealants • Crack Reducing Interlayer • Asphalt Fibers
• Reinforcing Steel - Fabricated and Stock • Welded Wire Mesh • Fiberglass Reinforcing • Basalt Composite Reinforcing • Concrete Fiber Reinforcing • Rebar Supports and Accessories • Smooth Dowels and Support Baskets • Dowel Epoxy • Expansion Joint Materials • Joint Sealants and Epoxies • Compression Seals • Bagged Concrete Mixes • Portland Cement Super Sacks
• Forming Lumber and Plywood • Hardwood Timber Mats • Engineered Forming Systems • Paving Forms • Trench Former Systems
• PVC Conduit
• HDPE Conduit and Microduct • Rigid Metal Conduit • Stainless Steel Conduit • Fiberglass Conduit • Fittings and Solvents • Wire • Cable Tray and Hanger Packages • Duct Bank Spacers • Exterior Lighting & Light Poles • Junction Boxes, Pull Boxes, Ground Boxes • Electrical Enclosures • LockJaw Enclosure Security • HPS Dry-Type Power Transformers
• PE and CPVC Pipe and Fittings
• Fire Sprinkler Tube
• Mechanical Tube
• HOPE Gas Lines
• Pipe Hangers and Rollers
• Firestopping
• Crystalline Waterproofing Admixture • Integral Concrete Hardeners • Curing Compounds • Evaporation Retardants • Bond Breakers • Air Entraining Admixtures • Set Retarders and Accelerators • Mid and High-Range Water Reducers • Silica Fume
• Framing Lumber and Hardware • Engineered Lumber Products • Siding and Trim • Finish Trim • Concrete Masonry Units • Bagged Mortar and Cement • Composite Decking • Tools
