Gator Aid Go

gator-aid go
crack filler

Surface Preperation:

To ensure proper adhesion and promote maximum service life FOR Gator-Aid GO Crackfiller, clean the entire asphalt surface making sure it is free of dirt, debris, oil, and grease. Trim any grass or weeds overgrowing onto the surface. Clean out all cracks and holes. Remove any remaining dirt and debris by sweeping with a stiff bristled broom or blower. Scrub oil, gas spots, stains and rinse with water.

Eazy to apply, applies like paint

Walk ready in one hour

Stays black season to season

APPLICATION:

Apply Crackfiller when air and surface temperatures are between 40-100°F (4-38°C). The surface temperature should not exceed 100°F (38°C) and no rain or freezing temperatures should be forecasted for 48 hours. Do not use when the surrounding air and surface temperatures fall below 40°F (4°C). Do not dilute.

A91v4ad24_13uflal_k5s.jpg__PID:1d28582f-7521-4b9a-9012-1cd43339fdaf

Gator-Aid® GO will set under good conditions in several hours, depending on weather and filler thickness. Surface should be readyfor traffic in 2 hours for straight-line driving; driveways and parking lots should be given 6-8 hours minimum due to power steeringforces placed upon the pavement. Allow more time at cooler temperatures and for poor surfaces. To improve uniform coverage onbadly worn surface, a second coat may be needed. Dry times are based on 77°F and 50% relative humidity.

gator-aid go crack filler

Surface Preperation:

APPLICATION:

gator-aid go
crack filler