SealFlex 6690™ is a cold pour, ready to use crack seal/filler that exceeds the specification for hot melt crack sealants, ASTM 6690, in both performance and durability. It provides a lasting and flexible seal with the ease of installation of self-leveling pourable materials. SealFleX™ 6690 is the ONLY product that meets both ASTM D6690 (Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements) and ASTM C920 (Standard Specification for Elastomeric Joint Sealants).
NO “speed bumps” created when pavement expands in summer
Self-adhesive allowing product to be applied to correct mistakes
Withstand high heat without softening, tracking or bleeding
SealFleX™ 6690 Benefits
Tolerates limited dampness of surface or reservoir
Cleaning can be completed with just water in uncured state – NO SOLVENTS needed before curing
Used for both joints/seams and cracksealing (NO routing or backer rod installation required on cracks)
Lower cost barrier to entry with ability to use double-diaphragm drum pump and NO costly melter repairs
Surpasses D6690 Type II requirements with Type IV performance characteristics in extremely cold environments
For use in repair or remedial applications where other joint sealing materials have failed because of excessive movement or poorweatherability. SealFleX™ 6690 Sealant can be used to seal irregularly shaped and/or spalled joints. It offers outstandingweathering resistance, remains flexible down to temperatures lower than -20°F (-29°C), is jet-blast resistant and will maintain fieldserviceability when exposed to intermittent fuel and oil spills. It bonds strongly to asphalt or concrete without the use of a primer.
For use in repair or remedial applications where other joint sealing materials have failed because of excessive movement or poorweatherability. SealFleX™ 6690 Sealant can be used to seal irregularly shaped and/or spalled joints. It offers outstandingweathering resistance, remains flexible down to temperatures lower than -20°F (-29°C), is jet-blast resistant and will maintain fieldserviceability when exposed to intermittent fuel and oil spills. It bonds strongly to asphalt or concrete without the use of a primer.
SealFleX™ 6690 is easily applied to joints/cracks using manual methods or an inexpensive double-diaphragm pump. The self-levelingcharacteristics ensure that the required joint wetting for development of appropriate adhesion occurs during application, no tooling isrequired.
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device
choosing a selection results in a full page refresh
Liquid error (layout/theme line 132): Could not find asset snippets/spurit_uev-theme-snippet.liquid
